Features

– Microcomputer control.

– Both monopolar and bipolar. Monopolar can be controlled by hand or foot. Bipolar can be controlled by foot only.

– Precise power control, can be used for all general surgical procedures.

– Touch control panel, three-way power output, with different audible and visual indication during the process of outputting.

– Automatic performance check during startup and Polar plate test.

– Full floating output system protects patient from tissue damage caused by low frequency current.

– REM contact quality monitoring system which substantially reduces the risk of burns under the patient return electrode. When patient plate and skin are not well contacted, the system will automatically stop the output and sound alarm.

 

Technical Specifications

PARAMETER	SPECIFICATION
Power	220V±22V (110V±11V), 50Hz±1Hz
Operating Frequency	416kHz
Power Rating	1100VA±10％
Five Working Modes	Monopolar Cut	a) pure cut: 1W~300W( Load 800Ω) b) Blend: 1W~200W(Load 800Ω)
	Monopolar Coag	c) Coag1 (Spray Coag): 1W~80W( Load 500Ω)     d) Coag2 (Soft Coag): 1W~120W( Load 500Ω)
	Bipolar Coag	1W~50W (Load 100Ω)
	Power Consumption	≦1100VA(Cutting function 300W)

 

Standard Configuration

Mainframe —-1set

Electrosurgical pencil —-5pieces

Electrosurgical pad —-10 pieces

Electrosurgical pad cable —-1piece

Foot switch —-1set

Tip clean sponge —-1piece

Bipolar forceps with cable —-1set

Fuse —-3pieces

Power cord —-1piece

Operating manual —-1book